Cleaning the printhead lens
111
Maintenance
Cleaning the printhead lens
You can solve some print quality problems by cleaning the printhead lens.
1 Turn the MFP off.
2 Open the upper front door and the multipurpose feeder door.
3 Remove the print cartridge. See Replacing the print cartridge.
4 Locate the glass printhead lens.
5 Gently wipe the printhead lens with a clean, dry, lint-free cloth.
Warning: Do not touch the charge roller. Touching the surface will damage the roller.
6 Reinstall the print cartridge.
7 Close the upper front door, and then the multipurpose feeder door.
8 Turn the MFP on.
Printhead lens
Charge roller
To Next Page
Loading...
