Lexmark X422 - Job 1: Single Page; Job 2: Mixed Content; Job 3: Use Paper Saver

Making copies
30
Printing, copying, faxing, and scanning
Job 1: single page
1 Place the document face down on the scanner flatbed or face up in the ADF. See Loading
scan media in the ADF and Loading scan media in the scanner flatbed for more
information and illustrations for proper orientation.
2 Press Start.
Job 2: mixed content
Make eight copies of a two page, letter size document containing one illustration.
1 Load all pages face up in the ADF. See Loading scan media in the ADF for more
information and illustrations for proper orientation.
2 Press Copy.
3 Press 8 on the keypad.
4 Press the down arrow until Options is highlighted, and then press ✓.
5 Press the left or right arrow button until Text/Graphics appears. Content is highlighted.
6 Press Start.
Job 3: use paper saver
Make three copies of a four page document which contains only photographs, but minimize paper
usage.
1 Load all pages face up in the ADF. See Loading scan media in the ADF for more
information and illustrations for proper orientation.
2 Press Copy.
3 Press 3 on the keypad.
4 Press the down arrow until Collate is highlighted, and then press the left or right arrow until
you see On.
5 Press the down arrow until Options is highlighted, and then press ✓.
6 Press the left or right arrow until you see Photo. Content is highlighted.
7 Press the down arrow until Paper Saver is highlighted, and then press the left or right arrow
until you see 4 on 1 port.
8 Press Start.