Lexmark X422 - Jams in the Fuser

Jams in the fuser
93
Clearing jams
Jams in the fuser
1 Open the upper front door. (See page 106 in Removing the used print cartridge if you
need instructions.)
2 Remove the print cartridge. (See Page 107 in Removing the used print cartridge if you
need instructions.)
CAUTION: The inside rear of the MFP may be hot.
3 Locate the jam inside the MFP.
4 Gently pull the jam straight out and then up.
5 Reinstall the print cartridge.
6 Close the upper front door.
7 Press ✓.