Menus
168
Using the MFP control panel and menus
Default Menus
Use the Default Menus to set MFP settings related to printing, copying, faxing, or e-mailing
documents, and security settings.
See the following menu items for Default Menus:
Custom Types To specify the kind of print
media associated with each
of the Custom Types
available in the Paper Type
menu item.
Values for Custom Type <x>, where <x> represents 1–6:
Paper* Note: If a user-defined name is available, it
is displayed instead of Custom Type <x>.
The user-defined name is truncated to 16
characters. If two or more custom types
share the same name, the name only
appears once in the Custom Types value
list.
Card Stock
Transparency
Labels
Envelope
Universal
Setup
To determine the default size when the Paper Size setting for a tray is Universal.
1 Select a unit of measure.
(* Denotes a country/region-
specific factory default
value)
Inches*
Millimeters*
2 Select the values. Portrait Width 3.00–14.17 in. (8.5 in.*) in increments of
0.01 in.
76–360 mm (216 mm*) in increments of
1mm
Portrait
Height
3.00–14.17 in. (14.17 in.*) in increments of
0.01 in.
76–360 mm (360 mm*) in increments of
1mm
Feed
Direction
Short Edge*
Long Edge
General Settings Print Settings
Copy Settings Security
Fax Settings Set Date and Time
E-mail/FTP Settings Delete Shortcuts
Paper Menu(continued)
Menu item Purpose Values and descriptions
To Next Page
Loading...
