Solving printing problems
125
Troubleshooting
A jam message remains on the
control panel even though you
cleared the jam.
• Make sure you cleared the entire paper path.
• Press
✓.
• Open and close the upper front door to restart the MFP.
• Make sure the print cartridge is installed.
While in PostScript 3 or PCL
emulation, the MFP is flushing
data (Flushing buffer remains
on the control panel).
• Make sure you are using the correct PostScript driver.
• The MFP does not have enough memory to print the job.
Install more memory. Refer to the Setup Guide for information
about installing optional memory cards.
Problem Solution
To Next Page
Loading...
