Lexmark X422 - Page 174

Menus
174
Using the MFP control panel and menus
Fax Send Settings
Defaults Menu – Fax Settings – Fax Send Settings
Menu item Purpose Values and descriptions
Resolution To define quality in dots per inch
(dpi). A higher resolution gives
greater print quality, but it
increases the fax transmission time
for outgoing faxes.
• Standard*
• Fine
• Super Fine
• Ultra Fine
Width Select the width of your document. 210 mm*
8.5 in.*
(* Denotes a country/region-
specific factory default value)
Content Specifies the type of content
contained in the fax job.
Text The fax job contains text only.
Text/
Graphics*
The fax job contains a mixture of
text and graphics.
Photo The fax job contains photo images
only.
Darkness Specifies the level of darkness for
the fax job.
1–9 (5*)
Dial Prefix A numeric entry field is provided to
enter numbers. The previously
entered numbers are shown.
The dial prefix could be a country
code or code businesses use to
dial an outside line.
Null* The entry field is limited to 57
characters. If you enter a number
string containing more characters,
the field is truncated.
Number
string
Automatic
Redial
Specifies the number of times the
MFP automatically tries to send
the fax job again by resubmitting
the Fax To number.
0–9 (5*)
Redial
Frequency
Select a range in minutes for the
number of redials to occur in that
time span.
1–200 (3*)
Behind a PABX Enables or disables switchboard
blind dialing without a dial tone.
On Do not wait for a dial tone.
Off* Wait for a dial tone.
Enable ECM Enables Error Correction Mode for
fax jobs which makes faxing more
reliable.
On* ECM is enabled.
Off ECM is disabled.
Allow Save Specifies if the Save button
appears on the Fax Destination
screen, enabling a way to save the
Fax To list as a shortcut.
On* A Save button appears on the
screen.
Off A Save button does not appear on
the screen.
Dial Mode Specifies the dialing sound, either
as a tone or a pulse.
Note: This setting may not be
available in all countries or regions.
Tone* A tone sounds for each number
dialed.
Pulse A pulsating noise sounds for each
number dialed.