Lexmark X422 - Page 184

Menus
184
Using the MFP control panel and menus
Quality Menu
Use the Quality Menu to change settings affecting the quality of printed characters and images.
Note: Values marked by an asterisk (*) are the factory default settings.
Separator
Sheets
To insert blank separator sheets
between jobs, between multiple
copies of a job, or between each
page of a job.
None* Does not insert separator sheets.
Between
Copies
Inserts a blank sheet between
each copy of a job. If Collation is
Off, a blank page is inserted
between each set of printed pages
(all page 1’s, all page 2’s, and so
on). If Collation is On, a blank page
is inserted between each collated
copy of the job.
Between
Jobs
Inserts a blank sheet between
jobs.
Between
Pages
Inserts a blank sheet between
each page of a job. This is useful if
you are printing transparencies or
want to insert blank pages in a
document for notes.
Separator
Source
To specify the print media source
that holds separator sheets.
Tray 1* Selects separator sheets from the
specified tray. Tray 2 is only
available if an optional 250-sheet
drawer or an optional 500-sheet is
installed.
Tray 2
MP Feeder
Defaults Menu – Print Settings – Quality Menu
Menu item Purpose Values and descriptions
Print Resolution To define the number of dots
printed per inch (dpi). The higher
the value, the sharper the clarity of
printed characters and graphics.
300 dpi Offers a lower resolution
printing option when memory
is at a premium.
600 dpi* Produces high quality output
for print jobs that are mostly
text.
1200 Image Q Uses line screening for print
jobs that contain bitmapped
images.
Defaults Menu – Print Settings – Finishing Menu(continued)
Menu item Purpose Values and descriptions