Menus
187
Using the MFP control panel and menus
Print Area To modify the logical and physical
printable area.
Normal* Note: The Whole Page
setting only affects
pages printed using
PCL 6. This setting has
no effect on pages
printed using PCL XL or
PostScript. If you try to
print any data in the non-
printable area defined by
Normal Print Area, the
MFP clips the image at
the boundary defined by
the Normal defined
printable area.
Whole Page
Defaults Menu – Print Settings – Setup Menu(continued)
Menu item Purpose Values and descriptions
To Next Page
Loading...
