Lexmark X422 - Page 218

Menus
218
Using the MFP control panel and menus
Save To save the current Fax To list
as a shortcut. The shortcut
number and name are
assigned automatically
Use the navigation arrow buttons to scroll to
Save and press
✓. This opens a screen
showing the assigned shortcut number and
name. Select Continue or Cancel as needed,
and press
✓.
Options Highlight Options and press
✓ to move to the next screen showing the next set of menu items
for the Fax menu. These are listed as follows.
Width Specifies the width of the
original document.
210 mm*
8.5 in.*
(* Denotes
country/
region-specific
factory default
values)
Use the left and right arrow buttons to make a
selection.
Note: Scan media must be loaded short edge
first in both the scanner flatbed and the ADF.
Resolution To define print quality in dots
per inch (dpi).
Standard* 200 x 100 dpi; for use with most documents.
Fine 200 x 200 dpi; for use with small print.
Super Fine 300 x 300 dpi; for use with documents with
fine detail.
Ultra Fine 400 x 400 dpi; for use with documents with
drawings or photographs.
Use the left and right arrow buttons to make a selection.
Darkness To lighten or darken text and
images on the fax printed
pages.
1–9 (5*) Use the left and right arrow buttons to make a
selection.
Content To control how the scanner
processes the content of the
original document.
Text*
Text/Graphics
Photo
Use the left and right arrow buttons to make a
selection
.
Back Highlight Back and press ✓ to return to the previous screen of the first set of menu items for the
Fax menu.
Fax(continued)
Item Purpose Values and descriptions