Print media specifications and guidelines
76
Media specifications and guidelines
2 Prepare print media for loading.
Note: Do not load different sizes or types of print media in the multipurpose feeder at the
same time. Doing so may cause a jam.
• Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or
crease the print media. Straighten the edges on a level surface.
• Hold transparencies by the edges and fan them to prevent feeding failures.
Note: Avoid touching the print side of the transparencies. Be careful not to scratch them.
• Fan envelopes back and forth to loosen them. Do not fold or crease the envelopes.
Straighten the edges on a level surface.
To Next Page
Loading...
