2-70 Service Manual
7541-03x
User attendance messages
User prompts
Error code Action
Adjusting color Wait until the process is completed.
Change <src><custom
type name>
<orientation>
This message allows the user to override the source for the remainder of a job. The page will
be printed as it is formatted on the paper installed in the tray. This may cause clipping. No
further Change prompts will be posted for the remainder of the current job.If the [src] is MP
Feeder, Manual Paper or Manual Envelope, the string 'Manual Feeder' will be used instead of
the [src] string from the Default Source list. If the [src] is Envelope Feeder, 'Envelope Feeder'
will be used. Additional messages may include:
• Paper changed—Select Continue.
• More information—the printer will present instructions.
• Ignore - use current source.
• Cancel Job—the printer job can be canceled.
Change <src><Custom
string><orientation>
The Change Orientation message is only displayed for Letter and A4 paper sizes.This IR
allows a user to override the source for the remainder of a job. The page will be printed as it
is formatted on the paper installed in the tray. This may cause clipping. No further Change
prompts will be posted for the remainder of the current job.If the [src] is MP Feeder, Manual
Paper or Manual Envelope, the string 'Manual Feeder' will be used instead of the [src] string
from the Default Source list. If the [src] is Envelope Feeder, 'Envelope Feeder' will be used.
Additional messages may include:
• Paper changed—Select Continue.
• More information—the printer will present instructions.
• Ignore - use current source.
• Cancel Job—the printer job can be canceled.
Change <src><size>
<orientation>
The Change Orientation message is only displayed for Letter and A4 paper sizes.This IR
allows a user to override the source for the remainder of a job. The page will be printed as it
is formatted on the paper installed in the tray. This may cause clipping. No further Change
prompts will be posted for the remainder of the current job.If the [src] is MP Feeder, Manual
Paper or Manual Envelope, the string 'Manual Feeder' will be used instead of the [src] string
from the Default Source list. If the [src] is Envelope Feeder, 'Envelope Feeder' will be used.
Additional messages may include:
• Paper changed—Select Continue.
• More information—the printer will present instructions.
• Ignore - This will ignore request and print on paper in tray.
• Cancel Job—the printer job can be canceled.
Change <src><type>
<size><orientation>
The Change Orientation message is only displayed for Letter and A4 paper sizes.This IR
allows a user to override the source for the remainder of a job. The page will be printed as it
is formatted on the paper installed in the tray. This may cause clipping. No further Change
prompts will be posted for the remainder of the current job.If the [src] is MP Feeder, Manual
Paper or Manual Envelope, the string 'Manual Feeder' will be used instead of the [src] string
from the Default Source list. If the [src] is Envelope Feeder, 'Envelope Feeder' will be used.
Additional messages may include:
• Paper changed—Select Continue. Ignored if no paper in tray. For size and type loaded in
source but not changed on paper menu.
• More information—the printer will present instructions.
• Ignore - This will ignore request and print on paper in tray.
• Cancel Job—the printer job can be canceled.
Incorrect Orientation This error can occur when the printer does not know the actual paper size that is loaded in a
tray due to an incorrect paper orientation setting, or because tray guides are not in proper
location. This message is not valid for the manual feeder or tray 5. Additional messages may
include:
• More information—the printer will present instructions
To Next Page
Loading...
