Lexmark X925 7541-03 series - Main Fan Removal

Repair information 4-53
7541-03x
Go Back
Previous
Next
Main fan removal
1. Remove the HVPS.
2. Remove the rear fan. See “Rear fan” on page 4-102.
3. Disconnect the engine board fan cable from the engine board.
4. Disconnect the main fan cable from CN22 on the engine board.
5. Remove the screw (A) fastening the main fan stay to the left EMI shield.
6. Remove the screw (B) fastening the main fan stay to the rear of the printer frame.