Lexmark X925 7541-03 series - Paper Empty Sensor Removal; Paper Full Sensor Removal

Repair information 4-205
7541-03x
Go Back
Previous
Next
Paper empty sensor removal
1. Take the main printer unit off of the option paper feed unit.
2. Remove the paper empty sensor from the frame by pressing the tabs (A) on the sensor together and
pulling it away from the frame.
3. Disconnect the sensor from the harness.
Paper full sensor removal
1. Take the main printer unit off of the option paper feed unit.
2. Remove the paper empty sensor from the frame by pressing the tabs (A) on the sensor together and
pulling it away from the frame.
3. Disconnect the sensor from the harness.