Lexmark X925 7541-03 series - Paper Path Sensor; Scan Sensor

4-146 Service Manual
7541-03x
Go Back
Previous
Next
Paper path sensor
See “Scan sensor” on page 4-146.
Scan sensor
Note: The scan sensor FRU assembly is made of the scan sensor and an optical (paper path) jam sensor.
1. Remove the ADF main feed unit.
2. Remove the scan sensor cover.
3. Remove the screw (A) securing the scan sensor to the scan sensor cover.
4. Remove the two screws (B) securing the paperpath sensor to the ADF main feed unit.