Lexmark X925 7541-03 series - Page 116

2-78 Service Manual
7541-03x
Go Back
Previous
Next
84 Replace <color>
Photoconductor
• Replace the specified photoconductor unit using the instruction sheet that comes with the
replacement specified photoconductor unit.
• If the problem persists, reset the supplies in the supplies menu.
84 <color> PC Unit
Missing
See “Imaging unit (photo developer) missing service check” on page 2-93.
84 <color> PC Unit
Nearly low.
• Select Continue to clear the message and continue printing.
• Select more information o get more solutions to the issue.
• Order the specified photoconductor unit. When print quality is reduced, install the new
specified photoconductor unit using the instruction sheet that comes with the replacement
specified photoconductor unit.
• If the problem persists, replace the printhead controller board. See “Printhead controller
board removal” on page 4-37.
88.xx <color> Cartridge
Low
• Show Me, View Supplies, and Tell Me More displays additional information.
• Replace the specified toner cartridge.
• Select Continue to clear the message and continue printing.
• Check CN17 and 18 on the printhead controller board for proper connectivity.
• If the problem persists, replace the printhead controller board. See “Printhead controller
board removal” on page 4-37.
88.xx <color> Cartridge
Nearly Low
• Show Me, View Supplies, and Tell Me More displays additional information.
• Replace the specified toner cartridge.
• Select Continue to clear the message and continue printing.
• If the problem persists, replace the printhead controller board. See “Printhead controller
board removal” on page 4-37.
88.xx Replace <color>
Cartridge
• Show Me, View Supplies, and Tell Me More displays additional information.
• Replace the specified toner cartridge.
• Select Continue to clear the message and continue printing.
• If the problem persists, replace the printhead controller board. See “Printhead controller
board removal” on page 4-37.
Error code Action