Destination Input Destination Input by HOME
ES300_Navi_U (L/O 0208)
8
2003 ES300 Navigation from Aug. ’02 Prod. (OM33592U)
When setting the destination, you
should use the map on a scale of one
half mile or smaller.
To select an “Address”, “Point of In-
terest”, “Freeway Entrance/Exit” or
“Intersection” in a different area, it is
necessary to change the search
area.
CAUTION
While you are driving, be sure to follow
traffic regulations and keep the road
condition in mind. If a traffic sign on
the road has been changed, the route
guidance may provide wrong informa-
tion.
Touch the switch on the “Destina-
tion” screen.
The screen changes and displays the
map location of your home.
Guidance starts from your current position to
your home immediately after you touch the
switch during driving.
For the steps to register your home, see
“Registering your home” on page 40.
To Next Page
Loading...
