Current Position Calibration
ES300_Navi_U (L/O 0208)
76
2003 ES300 Navigation from Aug. ’02 Prod. (OM33592U)
L00131
2. Touch either the left or right arrow to
correct the direction of the current ve-
hicle position mark.
Touch the
“OK” switch on the screen and
the map screen returns.
TIRE CHANGE CALIBRATION
The tire change calibration function
should be used when the tires are repla-
ced. This will adjust for any possible
change in tire circumference from the old
tires to the new ones. If this procedure is
not performed when tires are replaced,
the current vehicle position mark may be-
come incorrect.
To execute the fast distance tire calibration
procedure, touch the
“Tire change”
switch on the “Calibration” screen.
L00132
The above message appears and the fast
distance calibration is automatically started.
A few seconds later, the map screen returns.
To Next Page
Loading...
