960-0001-20 iGrowSeries 100 Installation Manual 7
Control Strategy
Prior to installing and programming the iPonic 600
it is important to determine an overall strategy to control
the environment in the hydroponic facility. The iPonic 600
is an extremely flexible and powerful device,
thus additional care and planning are required.
In order to aid you with the process, Link4 has provided several worksheets in the following pages. It is
assumed that you already possess a general understanding of hydroponic growth room controls. If not,
please review this section carefully.
It is recommended that you make copies of these sheets before using them. They will be useful in the
future should your control needs change.
Setpoint and Staging Worksheets
Figure 3.2 Factory default settings for setpoints and stages
To Next Page
Loading...