960-0001-20 iGrowSeries 100 Installation Manual 3
Installation
Content Inspection
The package should come complete with an iPonic 600
unit, a sensor module with 50‟ of cable attached,
and 4 – Self Drilling Screws. Upon arrival, check the contents with the packing list for damaged or missing
components (If you have the Integrated iPonic 600 Series Model, simply mount the panel using the two
holes on each side of the unit..
Make sure you have all items, all associated hardware, and necessary tools before you begin installation.
If there is any visible damage or missing parts, please contact our customer service at
support@Link4corp.com or 1-866-755-LINK or fax us at 714.558.9782.
1. iPonic 600
unit
2. Sensor module with 16ft. cable (sensor is packed inside the controller)
3. Quick Start guide
4. Soft copies of
a. User Manual
b. Factory default configuration file (factory.icf)
c. Factory default growth curve (factory.tab)
d. Optional growth schedule (flower.tab)
Recommended tools and hardware
1. Drill
2. 3/8” socket drive drill bit with 3” extender
3. Adjustable Wrench
4. 1/8” high speed steel drill bit
5. Appropriate mounting screws
For example: 4 pcs – 3/8” Drive, Hex Head Self Drilling Screws
6. Level (optional)
7. Pencil
To Next Page
Loading...