The last main section of the iPonic controller is the Stages
section. This is where you assign equipment to particular
cooling, heating, humidification and dehumidification stages.
The Stage settings can be set for:
• Temp Stages
• Humidity stages
Note: There are up to 8 temperature stages and 4
humidity/dehumidify stages.
There are 2 heating (H1, H2) and up to 6 cooling (C1, C2, C3,
C4, C5, C6) stages.
The normal stage (N) is when neither heating nor cooling is
required. C1 is the lowest stage of cooling and C6 the highest
while H1 is the lowest heating stage and H2 is the highest.
To Next Page
Loading...