LS SERIES SERVICE MANUAL
ISSUE 4.0 PROGRAM INFORMATION 6
3.4 VERSION V1.1 - ISSUE 22 - 30/09/2010 REPLACES V1.0 ISSUE 0
BUG FIXES
1 Fixed the problem where the machine would reboot if the loadcell was overloaded.
2 Fixed the problem where the machine may initially drive fast when performing machine
stiffness compensation using the PC Software Console.
3 Fixed the problem where a "blank" extensometer EEPROM could not be programmed.
4 Fixed the problem where more than one extensometer could not be selected or
calibrated using the extensometer interface box, part number 01/3905.
To Next Page
Loading...
