Lorenz Compact 7 Plus - Basic Settings; Course Vector; Screen Amplifier; Advanced Functions

31
User Manual
3.2 BASIC SETTINGS
The Basic Settings Menu provides access to the set up functions. Here you
can choose the language you want (see Par. 2.4).
'MENU' + "BASIC SETTINGS" + 'ENTER'
3.2.1 COURSE VECTOR
Disables (Off) or sets time as : 2, 10, 30 min, 1, 2 hours, Infinite. The default
setting is Infinite.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "COURSE VECTOR" + 'ENTER'
3.2.2 SCREEN AMPLIFIER
The Screen Amplifier function allows, when it is On and Home mode is set,
to place map on the screen related to the fix position and direction, so the map
shown is that before the ship. The default setting is On.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "SCREEN AMPLIFIER" + 'ENTER'
3.2.3 ADVANCED FUNCTIONS
The chartplotter can operate in two different modes: Advanced Mode and
Basic Mode. In Advanced Mode it is possible to have more available functions, oth-
erwise in Basic Mode there is a restricted number of functions (see Chapter 4). When
Advanced Functions is On the chartplotter works in Advanced Mode, otherwise
when it is Off the chartplotter works in Basic Mode. The default setting is Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ADVANCED FUNCTIONS" + 'ENTER'
3.2.4 USER POINTS
Turns On/Off/Icon the displaying of the User Point Name. The default setting
is On.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER'
3.2.5 DEPTH WINDOW
Turns On/Off the displaying of the Depth Window on the screen. The de-
fault setting is Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DEPTH WINDOW" + 'ENTER'