Lorenz Compact 7 Plus - Selecting Track Memorizing Type; Selecting Distance; Selecting Time; User C-Card Menu

70 User Manual
(select "No" otherwise).
4.4.7 SELECTING TRACK MEMORIZING TYPE
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "STEP
UNIT" + 'ENTER'
Choose Distance (Dist) - the chartplotter can store a fix when the distance
from its last stored position is greater than a defined distance; Time - the chartplotter
can store a fix after a defined time; Auto - the software decides when storing a posi-
tion, on the basis of the straight or curved track. The default setting is Time.
4.4.8 SELECTING DISTANCE
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DIS-
TANCE" + 'ENTER'
When the tracking function is On and the type of track storing is Distance,
you can store a fix when the distance from its last stored position is greater than a
defined distance. Choose in the range 0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0 Nm (the
distance unit is selected by the user, see Cap. 5). The default setting is 0.01 Nm.
4.4.9 SELECTING TIME
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "TIME"
+ 'ENTER'
When the tracking function is On and the type of track storing is Time, the
chartplotter can store a fix after a defined time. Choose among 1, 5, 10, 30 sec, 1, 5,
10 min. The default setting is 1 sec.
4.5 USER C-CARD MENU
The chartplotter allows to copy information to an User C-CARD. You can
also return the information to internal memory at a later time. This allows virtually
unlimited storage.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER'