Recording
10
By default, the system is set to immediately record video from connected cameras in Con-
tinuous Recording Mode.
•
Recording—Continuous: Normal, continuous recording.
You can set the system to stop recording once the hard drive is full, or to continually record
by overwriting previously recorded data. For more details, see 14.6.1 Formatting the Hard
Drive, page 49.
The system also includes motion recording:
•
Recording—Motion: The system records when motion is detected by the camera.
#LX400080; r.36800/36800; en-US
20
To Next Page
Loading...
Need help?
General