Using the PC/Mac Client Software
16
16.24 Viewing System Information
1. Click the Remote Setting tab, and click System>Info.
16.25 Configuring Firmware Upgrades
Firmware upgrades can provide improved functionality to your DVR. When firmware up-
grades become available, you will automatically be prompted to upgrade your system. You
must have the latest DVR firmware and client software to connect to the DVR over the
Internet.
To configure firmware auto upgrades:
1. Click the Remote Setting tab, and click Advanced>Auto Upgrade.
2. Under Auto Upgrade, select Enable to enable automatic firmware updates. Mes-
sages for firmware upgrades will appear on the DVR locally and on the client software.
3. Check Check for update to enable local messages on the DVR to notify you for up-
dates. The system will check for firmware upgrades every hour.
NOTE
Click Detect to check for firmware updates manually.
4. Click Save to save changes.
#LX400080; r.36800/36800; en-US
84
To Next Page
Loading...
Need help?
General