Using the Main Menu14
14.7.6 Setting the Remote Control ID
If you have more than one DVR, you can use the ID function to pair the remote control with
a specific DVR.
To pair the remote control:
1. On the DVR, right-click to open the menu bar and click
.
2. Enter the DVR user name (default: admin) and password (default: 000000).
3. Click System>Control Device.
4. Under System ID, enter the desired ID number.
5. Click Apply to save your settings. Right-click repeatedly to return to live view.
6. On the remote control press ID, then press the ID number you entered in step 4 and
press Enter to confirm.
NOTE
You do not need to enter 0’s in the ID for unused digits. For example, if the ID is "004," press
ID>4>Enter.
#LX400080; r.36800/36800; en-US
54
To Next Page
Loading...
Need help?
General