Managing Passwords13
6. Click Apply to save your settings.
7. Configure the following:
• User Enable: Select Enable to enable the user account.
• User Name: Enter the desired user name.
• Password Enable: Select Enable.
• Password: Enter your desired password.
• Confirm: Re-enter the password.
8. Click Apply to save your settings.
Now, you can log in to the system locally, or remotely using the user name and password
you created. When logging into the system with a user account, the user will only have ac-
cess to the menus you assigned.
#LX400080; r.36800/36800; en-US
34
To Next Page
Loading...
