Lorex LH314 - Mouse Control

5
Getting Started
Mouse Control
The mouse is the primary input device for navigating system menus.
NOTE:
Unless otherwise noted, all system functions described in this manual are achieved through
mouse input.
To use a mouse with the system:
1. Connect a USB mo
use to the USB port on rear panel of the system.
NOTE:
Only the USB port on the front panel is designed for data backup to a USB flash drive. Do not
connect a USB flash drive to the USB port on the rear panel.
2. Use the mouse buttons to perform the following:
• Left-Button: Click to sel
ect a menu option;
while in Split-Screen mode (Live View or
Playback), click on a channel to view the
selected channel in full-screen.
• Right-Button: Click to return to previous menu;
exit menus/modes.
3. Scroll-Wheel: Scr
oll up/do
w
n to change values
in selected menu options; position markers in
playback bar.
Figure 2.0 Connect a USB mouse to the USB port on the rear panel
1
2
3
Figure 2.1 Mouse button operation