Lorex LH314 - Formatting the Hard Drive

69
Appendix F: Replacing the Hard Drive
Formatting the Hard Drive
If you replace the pre-installed hard drive, it must be formatted in order to function properly with
the system.
To format the hard disk:
1. From the Main Menu, click . The Record menu opens.
2. Click Format HDD.
3. Click Yes to
format the hard disk or click No to cancel.
Please allow a few moments for formatting to take place and the system to reset.
ATTENTION: Formatting the HDD
erases
all data on the hard disk. This
step cannot be undone
.
Figure 27.7 Confirm formatting