62
Appendix C: Changing Ports On Your System
You must now include the new HTTP port number in the URL when logging in to your system with
Internet Explorer.
NOTE: Re
quires Internet Explorer 6 or later.
Local Viewing:
To log in using the new port number:
1. Open Internet Explorer.
2. In the address bar, enter the IP address of your system immediately followed by :85 (no
spaces)
. For example, http://192.168.1.89:85
3. Enter your
LAN ID
and
password
to log in to your system using DVR Netviewer (by default,
admin ID: 9; password 3333).
Figure 26.2 Enter :85 at the end of the IP address
Figure 26.3 Login with your LAN ID and password
To Next Page
Loading...
