Lorex LH314 - Page 19

7
Getting Started
Remote Control (cont’d.)
The remote control is the secondary input
device for navigating the system’s graphical
user interface.
To use the remote control:
1. MENU: Opens the system main menu.
2. : From full-screen single channel
view, changes display view to Quad
split-screen (
4-channel only ).
3. S/CH+: Move cursor in menus up;
Chan
nel Up.
4. X/FWD: Move cursor in menus right;
during playback, incr
ease forward
playback speed (5X, 15X, 60X).
5. W/REW: Move cursor in menus left;
during playback,
increase reverse
playback speed (5X, 15X, 60X)
6.
/: Start/pause forward playback.
7. T/CH-: Move cursor in menus down;
Chan
nel down.
8. : Confirm menu selections.
9. ESC: Go back / exit menus.
10. OSD: Show/hide the on-scr
een display.
11. LIST: Open the Ev
ent List menu.
12. : While in Event List menu, press to delete a selected event (no confirm or undo).
13. : Decrease value of selected menu option.
14. : Increase value of selected menu option.
*Remote control included with the system may vary depending on model.
1
2
3
4
5
6
7
9
10
11
12
13
14
8
Figure 3.1 Remote Control
*