Lorex LH314 User Manual

26
Using the Main Menu
• Record Mode: Select one of the following:
z Single-Way: The system
stops recording when the internal
hard
drive is full.
z Overwrite: The system
continues recording when the
int
ernal hard drive is full by
overwriting the oldest recorded
data.
z No Record: The system does
not
record.
3. To exit, right-click until you return to the
main screen.
8/16-channel
NOTE: As you make changes to the recording
parameters, the storage calculator at the
bottom of the menu displays the time remaining
on the hard drive.
To configure record settings:
1. From the Main Menu, click . The
Record menu opens.
2. Configure the following:
• Record
Mode: Click to sel
ect one of the
following:
z Single-Way: The system
stops recording when the internal
hard
drive is full.
z Overwrite: The system
continues recording when the
intern
al hard drive is full by
overwriting the oldest recorded
data.
z No Record: The system does
not
record.
• Frame Rate: Set the frame r
ates for
alarm/motion, working hour, and
non-working hour:
z Alarm/Motion Rate: Click under
each camera and select X, 2, 3, 5,
7.5, 10, or 15 (fps).
z Working Hour Rate: Click under
each camera and select 0, 2, 3, 5,
7.5, 10, or 15 (fps).
Figure 12.3 Record menu (8/16-channel)
Figure 12.4 Frame Rate menu (8/16-channel only)

Lorex LH314 Specifications

General

Brand	Lorex
Model	LH314
Category	DVR
Language	English