LSI LASTEM Alpha-Log - FTP Server; Data Delivery to FTP and MQTT Server or USB Memory

Alpha-Log – User manual
LSI LASTEM SRL
INSTUM_03388
Page 27 / 116
Example of HTTP server configuration.
The password is visible in the configuration file.
2.2.7.2 FTP server
Alpha-Log has an internal FTP server. Using an FTP client, it is possible to send files and to access to the
internal file system.
Example of FTP server configuration.
The password is visible in the configuration file.
For security reasons and intrinsic "weakness" of the FTP protocol, it is better to use the SFTP, which
allow to access to the whole Alpha-Log file system.
2.2.8 Data delivery to FTP and MQTT server or USB memory
Typically, Alpha-Log send data in the form of ASCII file to one FTP area inside a server.
From Elaboration Parameters (1).
- General Parameter (2). Set the rate of data
delivery to FTP server or USB memory, in
normal situation and in case of alarm
event.
- Elaboration Time rates (3). Summarize the
delivery rate for each measurement.
Data export options (4) set the list of information to be added to the ASCII file delivered to FTP or MQTT
server.
For more information, see §4.1.7.
1
2
3
4