4.1.10.2 Logic assigned to an action
Each logic can be jointed to the following actions:
• SMS: when the logic status occurs, Alpha-Log sends one SMS message to up to 5 users. The function
is active only if the data logger works in low consumption mode (§4.1.2) and if a 3G / 4G modem is
connected.
• e-mail: when the logic status occurs, Alpha-Log sends the message via e-mail to the specified
addresses. The maximum length of the addresses list cannot exceed 128 characters.
• FastMode: when the logic status occurs, Alpha-Log exits from any low-power mode and start sending
data using the value reported in General parameters-> Elaboration data delivery rate in alarm
condition (§4.1.7).
• MQTT: when the logic status occurs, Alpha-Log sends MQTT messages.
• WakeUp: when the logic status occurs, Alpha-Log exits from the low consumption mode and
becomes accessible from the outside, via its network interfaces (§2.2.5).
Inside SMS and e-mail messages it is possible report some related information as: Logic name, Date/Time of
the data generating alarm condition, Site name, Station name and Serial number.
It is possible to attach in the Mail message a file reporting the last measurements.
Fig. 19 – Example of Mail action assigned to a logic called “Low Battery”
To Next Page
Loading...
