26 The GS550 System
3. 4H2) Set user password: Press Next three times to advance to the tare menu protection page
or, to change the user password, use Up and Down to adjust the flashing letter and then use
Next to advance to the next letter. Press Enter to save any changes.
4. Menu 4H3) Tare protected: use Up and Down to switch between “yes” and “no” and press
Next to advance to the next menu page.
5. Repeat step 4 to adjust password protection for each menu as required. Press Enter at any
time to save changes made. Press Exit at any time to return to menu 4) Installation. If there are
any unsaved changes the display will request confirmation: press Enter to save before quitting
or press Exit to quit without saving.
SkyAzúl, Equipment Solutions
To Next Page
Loading...
