Chapter 5 Remote Connection
5-2
Remote connection sequence by using dial-up modem is as follows.
(a) Cnet I/F module connected with PLC setting
1) Sets active mode of RS-232C channel of Cnet I/F as XGT server at XG-PD.
2) Sets Modem type of Cnet I/F module (RS-232C) as Dial-up modem and inputs atz in Modem
Initialization.
[Figure 5.1.2] XG-PD setting example
(b) XG5000 setting
1) Execute XG5000 and pop up online settings window by selecting “Online -> Connection
settings”.
Here selects “Connection settings -> Type” as Modem.
[Figure 5.1.3] Modem connection setting screen of XG5000
To Next Page
Loading...
Need help?
General
