• At Local Mask address, enter the BRI Port SubNet of the router at the DRM
site
For example, 255.255.255.252
5. Press the left arrow twice.
Response: The cursor is positioned at process selections (Y/N).
6. Enter y.
7. Press the esc key until the main menu is displayed.
Response: The main menu is displayed.
3.10.3.2 Configure the D-channel
1. Enter 3 for configuration.
Response: The Configuration Commands menu is displayed.
2. Enter 2 for port.
Response: The Configure Port menu is displayed.
3. Enter 300 for BRI.
Response: The ISDN Port Configuration menu is displayed.
4. Enter 1 to configure PRI/BRI D Channels.
Response: The ISDN D Channel menu is displayed.
5. At Port Name, enter BRI.
6. Press the left arrow.
Response: The cursor is positioned at process selections (Y/N).
7. Enter y.
8. Press the esc key until the main menu is displayed.
Response: The main menu is displayed.
3.10.3.3 Configure ISDN Incoming Telephone Numbers
1. Enter 3 for configuration.
Response: The Configuration Commands menu is displayed.
2. Enter 2 for port.
Response: The Configure Port menu is displayed.
3. Enter 300 for BRI.
Response: The ISDN Port Configuration menu is displayed.
4. Enter 2 to configure incoming telephone numbers.
Response: The ISDN Incoming Telephone Number and SPID menu is
displayed.
NETWORK PROCEDURES
Procedure 3.10
235-200-150
January 2003
Page 3.10-4 Issue 3.00
To Next Page
Loading...