Lucent 5ESS DRM User Manual

c1::dsk/c1t0d0 unavailable connected unconfigured unknown
c1::dsk/c1t1d0 disk connected configured unknown
c2 scsi-bus connected configured unknown
c2::rmt/0 tape connected configured unknown
25. Open the bezel at the front of the AW to access the primary disk drive. The bezel
is opened by gripping the bezel at the two finger holds and rotating it down to its
open position. See Figure 4.5.4-1 (Netra 240 Front Panel).
26. Locate the LED indicators for the primary disk (Hard Disk Drive 0 (HDD 0 - left
disk)) on the panel. See Figure 4.5.4-2 (Netra 240 Hard Drive LED Indicators).
Figure 4.5.4-1 — Netra 240 Front Panel
Figure 4.5.4-2 — Netra 240 Hard Drive LED Indicators
ADMINISTRATIVE WORKSTATION MAINTENANCE
Procedure 4.5.4
235-200-150
October 2005
Page 4.5.4-4 Issue 3.00B

Lucent 5ESS DRM Specifications

General

Brand	Lucent
Model	5ESS DRM
Category	Control Unit
Language	English