Lucent 5ESS DRM - Page 584

A2.2.3 PRM:EE-CB00-B
A2.2.3.1 PRM Format
PRM_p EEda CB00 xxxx yyzz hh hh hh
A2.2.3.2 PRM Source
Application Integrity Monitor (AIM).
A2.2.3.3 Function
AIM UNIX RTR operating system application process initialization failure.
A2.2.3.4 PRM Expansion
p = Active control unit (CU):
0––CU0
1––CU1
E = Informational PRM.
E = Application software generated this PRM.
d = Level of most recent UNIX RTR operating system
initialization:
0 –– No initialization or D0 initialization.
1 –– D1 initialization.
2 –– D2 initialization.
3 –– D3 initialization.
4 –– D4 initialization.
These initializations are explained in 235-105-250, 5ESS
Switch System Recovery Manual.
a = Application initialization level within the UNIX RTR
operating system initialization specified in field ’d’.
CB00 = Application function = AIM killable process initialization
failure.
xxxx = UNIX RTR operating system application process utility ID:
0017 –– First in-first out (FIFO) driver (FDA).
00C0 –– Input/output driver (IODRV).
00C2 –– Scan and signal distributor administration
(SCSD).
0CC –– RTR Data Link Driver for DRM
0117 –– Plant measurement database monitor (PLDMON).
0186 –– Kernel level overload monitor (KLMON)
0188 –– UNIX RTR operating system supervisor overload
monitor process (SUOVPRC).
0406 –– Process to load ODD onto Disk (PLOD).
0407 –– Application data link (APDL).
0410 –– Switch maintenance kernel process (SMKP).
0411 –– Switch maintenance power switch monitor
(SMPSM).
APPENDIX 2
PROCESSOR RECOVERY MESSAGES
235-200-150
January 2003
Page A2-8 Issue 3.00