CMD RESULT
6XX Inhibit Alarm XX
7XX Allow Alarm XX
800 Auto Alarm Retire
801 Manual Alarm Retire
2.9.5.9 MCC Keyboard
The local DRM MCC keyboard keys are used in a normal fashion to enter numeric
codes, input messages, and alphanumeric responses to the system. Certain keys are
used for administration as explained in the remainder of this section.
The MCC uses five function keys. When one of these keys (see Figure 2-40) is
depressed, the system performs the corresponding function. The keys are as follows:
• ALM RLS: alarm release
• CMD/MSG: input command or input message
• NORM DISP: normal display
• EMER DISP: emergency action display
• Control + ENTER (not the return key): UNIX mode key (switches between DRM
mode and UNIX mode on the MCC).
Figure 2-40 — MCC Video Terminal With Function Keys
235-200-150
Feburary 2007
5ESS
®
SWITCH DISTINCTIVE REMOTE MODULE
Issue 3.00O Page 2-51
To Next Page
Loading...
Need help?
General