Selecta
PBL200051, Rev J
28 Operation
are disabled. The LaserLink S laser delivery adaptor is used for treatments
specifically cleared for the compatible laser photocoagulator.
Selecta is shipped directly from the factory to your site. Your local Lumenis
representative initially unpacks, inspects, sets up, and installs the Selecta to
ensure that it is working properly. In addition, Lumenis provides in-service
training to ensure that your surgical staff is experienced with the performance
and safety considerations of the device.
CAUTION - Do not attempt to operate the laser system until a qualified
Lumenis representative has installed and checked it for proper operation.
Thereafter, you, or the nursing staff at your facility, will perform the daily
maintenance routines associated with this device, including inspecting and
cleaning the components; focusing; and verifying the aiming beam. These
procedures are detailed in this manual.
Lumenis lasers and delivery systems are precision medical instruments. They
have undergone extensive testing and with proper handling are useful and
reliable clinical instruments. If you have questions regarding your laser or
delivery system, contact your local Lumenis representative.
WARNING - Lasers generate a highly concentrated beam of light which may
cause injury if improperly used. To protect the patient and operating
personnel, the entire laser and your delivery system operator manuals,
including all Safety and Regulatory sections, should be carefully read and
comprehended before operation.
To Next Page
Loading...
