LUMENIS SELECTA - Total Energy and Pulse Count Displays-Photodisruptor and SLT Mode

Selecta
PBL200051, Rev J
66  Operation
Total energy and pulse count displays—Photodisruptor and SLT mode
The total energy (mJ) delivered since the reset button was pressed is shown in
the total energy display. The total pulse count since the reset button was
pressed is shown in the total pulse count display. Use the reset button to reset
the total pulse count and energy displays to zero.
Total energy and total pulse count displays and reset button
(Photodisruptor mode shown)
Reset button
Total energy delivered
To t a l p u l s e c o u n t