Selecta
PBL200051, Rev J
30 Operation
Laser module
The integrated laser module houses the treatment and aiming beams, laser
source, and associated optics, enabling an otherwise diagnostic slit lamp to be
used as a therapeutic laser instrument.
Remote control
The remote control is the control panel for the Selecta laser. The remote
control allows you to select laser treatment settings, such as laser mode, energy,
and aiming beam intensity. The remote control can be placed on the table so
that the operator can verify the laser treatment parameters without moving
back from the slit lamp binoculars.
Slit lamp table and console
The slit lamp table and console houses the main power keyswitch, emergency
off button, control electronics, and power supply. The integrated slit lamp is
mounted on the slit lamp table. The table height is electronically adjustable.
The table also includes the mains receptacle, a fused IEC socket for 100-
120 V or 220–240 V AC.
Footswitch and joystick pushbutton
The laser treatment beam can be activated either by a pushbutton on the slit
lamp joystick or by an optional footswitch. The method of activation is user-
selectable via the laser options screen. For safety reasons, when the user selects
either footswitch or joystick, the system automatically disables the other.
Main power cable
The main power cable connects the laser to the main power source.
External door interlock plug
The external door interlock is a safety feature that disables the laser if someone
opens the treatment room door or removes the interlock plug.
To Next Page
Loading...
