Remote Control Treatment Settings 67
Selecta
PBL200051, Rev J
Burst mode—Photodisruptor laser mode
There are three burst modes available in photodisruptor laser mode: single,
double, and triple burst. For example, if triple burst is selected, when the
treatment laser is activated, the selected energy will be delivered in a “pulse
train” of three pulses. Refer to the “Specifications” section of this manual for
additional detailed information.
Set the burst mode using the burst mode selector. The currently selected burst
mode is shown in the burst mode display.
Selecting the photodisruptor burst mode
(Photodisruptor screen)
Burst mode
display
Burst selector
To Next Page
Loading...
