EMC Guidance and Manufacturer’s Declarations 119
Selecta
PBL200051, Rev J
EMC Guidance and Manufacturer’s Declarations
Guidance
and
Manufacturer's
Declaration
Electromagnetic
Emissions
Selecta ophthalmic laser family
is
intended
for
use
in
the
electromagnetic
environment
specified
below.
The
customer
or
the
user
of
Selecta ophthalmic laser family
should
ensure
that
it
is
used
in
such
an
environment.
Emissions
test
Compliance
Electromagnetic
Environment
-
guidance
RF
emissions
CISPR
11 Group
1 Selecta ophthalmic laser family
uses
RF
energy
only
for
its
inter-
nal function;
therefore,
its
RF
emissions
are
very low
and
are
not
likely
to
cause
any
interference in
nearby
electronic
equipment.
RF
emissions
CISPR
11 Class
A Selecta ophthalmic laser family
is
suitable
for
use
in
all establish-
ments other than domestic, and may be used in
domestic estab-
lishments
and
those directly
connected
to
the
public
low-voltage
power
supply
network that
supplies
buildings used
for
domestic
purposes, provided the
following warning statement is heeded:
Warning: This system is intended for use by health care profes-
sionals only. This system may cause radio interference or may
disrupt the operation of nearby equipment. It may be necessary
to take mitigation measures, such as re-orienting or relocating
the system or shielding the location.
Harmonic
emissions
IEC61000-3-2
Class
A
Vo l t a g e
Fluctuations/ flicker
emissions IEC61000-3-3
Complies
To Next Page
Loading...
