Remote Control Treatment Settings 65
Selecta
PBL200051, Rev J
Remote Control Treatment Settings
Energy—photodisruptor and SLT mode
Use the energy control to adjust the energy per pulse or energy per burst,
depending on the laser mode. Rotate the control clockwise or counter-
clockwise to respectively increase or decrease the laser energy. Laser energy is
displayed in millijoules. Refer to the “Specifications” section of this manual
for available energy settings. The energy display shows the currently selected
energy.
Selecting the energy per burst
(Photodisruptor mode shown)
Energy control
Selected energy per burst
To Next Page
Loading...
