Changing the Fuses 89
Selecta
PBL200051, Rev J
5 Once the housing door is open, slide the clip spring away from the base of the
bulb receptacle. To remove the old bulb, grasp the bulb base and pull it out.
Slide the clip spring and remove the bulb
6 Holding a new bulb by its base, and being careful not to touch the glass with
your fingers, insert the prongs securely into the bulb receptacle. Close the
cover door and tighten the thumbscrew.
Place a new illumination bulb in the receptacle
To Next Page
Loading...
