MAINTENANCE/SERVICE
Maintenance Schedule
The following maintenance schedule is a listing
of
periodic maintenance procedures, organized
by
service
intervals.
For
detailed instruction, see the specific heading
in
Maintenance/Service section. Use "Fuels,
Auids and Lubricants as specified under that heading.
SERVICE INTERVALS
The recommended
se
rvice intervals are
in
hours of operation. Use
th
e hour meter
in
the cab
to
indicate
when the next service interval
has
been reached.
IMPORTANT: Recommended
in
tervals
are
for average conditions. Service wind rower more often
if
operated under adverse conditions (severe dust, extra heavy loads, etc.), Regular maintenance is the best
insurance against early wear and untimely breakdowns. Following th
is
schedule will increase machine life.
Where a service interval
is
given
in
more than one time frame,
ego
-lOa
Hours or Annually", service the
windrower at whichever interval
is
reached firs
t.
A CAUTION: Carefully
follow
safety messages given
under
-Service
Procedures·
,
AT FIRST USE:
See -Break-In Period- in Operation section.
10
HOURS
OR
DAILY
1.
Grease drive line.
2. Check tire inflation.
3.
Check engine oil level.
4. Check engine coolant level
at
re
se
rve tank.
5. Clean radiator. hydraulic oil cooler,
and
NC
condenser.
6. Clean cab fresh air intake filter.
50
HOURS
1. Grease caster pivots
2. Grease header drive pulley,
3. Grease header clutch pivot.
4.
Grease transmission driveline.
5. Grease walking beam center pivot.
6. Grease top lift link rear pivot.
7.
Grease forked caster spindle bearings.
7.
Check hydraulic oil level.
(16
.5 tire only)
8. Check air cleaner restriction gauge. Clean
element when indicated.
9.
Fi
ll
fuel tank.
10.
Check fuel sediment bowl, clean
if
necessary.
11
.
Drain
fuel filter water trap -
di
esel engine.
111
To Next Page
Loading...
