MacDon 9200 - Page 122

TROUBLE SHOOTING
SYMPTOM
PROBLEM
SOlUTION REF.
Both wheels w11l not pull
low oU level . Check oil reservoir
84
in forward or reverse.
level .
Power wheels Engage power wheels.
lOS
di sengaged.
Damaged hydrau lic Repla ce damaged lines . •
lines preventing proper
oil flow.
Steering controls
wom
Check variable speed •
or defective. lever and steering for
loose,
worn or dam-
aged ball Joints and
connecting rods.
Speed-range control Adjust speed-range
103
not working. control linkage.
Pump arms have Repair or tighten.
•
broken shaft or loose
hardware.
Brakes binding or not
AdJuS1 brakes and 107
releasing fully. remove any foreign
objects .
Charge pressure rel ief Check the varve adjust-
•
valve misadjusted or
meot Check valve parts
damaged. and seat.
Failed pump
or motor. Repair or replace pump •
or motor .
One wheel does not One power wheel d is- Engage power wheel .
105
pull in forward or engaged.
reverse.
Pump arm has broken Replace shaft or roll
•
shaft or sheared roll pin .
pin.
Steering controls worn
Check variable
speed
•
or defective. lever and steering for
loo se, worn or dam-
aged ball jOints and
connecting rods.
Damaged hydraulic Replace damaged lines.
•
lines preventing proper
oil flow.
Brake s binding or not
Adju st brakes and
107
releas i ng fully.
rem ove any foreign
objects.
* See your Wlndrower d ea ler.
124