OPERATION
Driving the Windrower (continued)
MAl<!NG
A
SPIN
TURN:
Hydrostatic steering gives the operator signif-
icantly more maneuverability than mechanical
steering
.
A
CAunON
:
Be
sue
area.
is clear before
making tums.
Although
trador
pivots
"on
the spoI",
ends
d
header
travel
In
a large
arc.
To
make
a spin turn:
1.
Move
the variable speed lever
(A)
out of its
neutral
detent (towards
the
seat
, not forward or
rearward)
.
2. Slowly tum the steering wheel
in
the desired
direc
ti
on of tum. The
wind
rower will pivot
between
the
drive wheels.
3. To stop
the tum, slowly lum
the
steering
wheel
back
to its centered position.
4. To increase the tum radius, slowly move the
ground speed lever away from neutral.
Remember
that
thi
s will
increa
se
ground
speed
as
well
.
5.
To
, stop
the
tum,
return
all
controls to
neutral.
33
CONTROL
LEVERS
-
SPIN
TURN
To Next Page
Loading...
